Commercial Projects

Macatee Engineering performed platting and design services for this office supply store located on 2.25-acres in North Richland Hills.  Design included grading, drainage area map, utilities, paving, dimensional control and erosion control. 

Development Cost: $250,000 

Macatee Engineering performed design services for this 1.4-acre dealership location.  Design included grading, drainage area map and storm sewer calculations, utiltities, paving, dimensional control and erosion control.

Development Cost: $75,000

Macatee Engineering performed design and surveying services for an addition to the Catheterization Lab at the medical center.  Design included a drainage area map and calculations; a drainage plan, grading and erosion control plans. 

Development Cost: $10,000

Macatee Engineering performed platting, design and surveying services for this 1.35-acre medical office-building site in the Communications Park Addition.  Design included dimensional control, paving, drainage, grading, erosion control, water and sanitary sewer plans. 

Development Cost: $75,000

Macatee Engineering performed design services for parking and building expansion on this 13.065-acre car dealership site.  Design included grading, paving, drainage, erosion control and utility plans. 

Development Cost: $50,000

Macatee Engineering performed platting and design services for this 7.085-acre car dealership site on IH20.  Design included grading, drainage area map and calculations, storm sewer plan, water and wastewater, paving and dimensional control, erosion control, tree protection and removal plans.  The site location required permitting with Texas Department of Transportation for a driveway permit.

Development Cost: $2,250,000

Macatee Engineering performed design for two Christian Brothers Automotive sites, Roanoke and Valley Ranch, Irving.  Design for the 0.63-acre site in the Valley Ranch Association of Irving included a drainage area map, grading, paving, erosion control and utility plans. 

Irving Development Cost: $175,000

Macatee Engineering performed design for two Christian Brothers Automotive sites, Roanoke and Valley Ranch, Irving.  Design for the 0.58-acre site in Roanoke included grading, drainage, paving utilities and erosion control. 

Roanoke Development Cost: $125,000

Macatee Engineering performed design for two Just Brakes sites, Frisco and Roanoke.  Design for the 0.912-acre site off Preston Road and Warren Parkway in Frisco included site plan preparations, Texas Department of Transportation permitting, grading, drainage, paving, utility and erosion control plan preparation.

Frisco Development Cost: $500,000

Macatee Engineering performed design for two Just Brakes sites, Frisco and Roanoke.  Design for the 0.859-acre Roanoke site off State Highway 114 included site plan preparation and onsite civil plan preparations including grading, paving, drainage, utility and erosion control.

Roanoke Development Cost: $200,000

Macatee Engineering performed the platting and design for this 5 building office complex totaling 28,000 square feet of single-story office space on 2.96 acres in the Hebron / SH 121 area. Design included grading, paving, dimension control, drainage, storm, erosion control, water and wastewater plans. Surveying services included performing boundary and topographic surveys; preparing preliminary and final plats; providing construction staking; and preparing easement documents.

                                                                                                Construction Cost: $200,000

Macatee Engineering performed the platting and design for the Atrium III building in the University Office Park at 1600 N. Collins in Richardson. Design for this 4-story building totaling 2,668 square feet on 5.73 acres included grading, paving, dimension control, drainage, storm, erosion control, water and wastewater plans. Surveying services included performing boundary and topographic surveys; preparing preliminary and final plats; providing construction staking; and preparing easement documents.

                                                                         Construction Cost: $400,000

Macatee Engineering performed the platting and design for 2 buildings totaling 273,200 sq. ft. of office space on this 9.9-acre site at Plano Road and Lookout in Richardson. Design included grading, paving, dimension control, drainage, storm, erosion control, water and wastewater plans, a median opening and turn lane plan for Plano Road. Surveying services included performing boundary and topographic surveys; preparing preliminary and final plats; and providing construction staking.

                                                                         Construction Cost: $700,000

Macatee Engineering performed the platting and design for this storage facility on a 7.5-acre site in Euless. Design included grading, paving, dimension control, drainage, storm, a detention pond, erosion control, water and wastewater plans. A driveway design was also required and approved through Texas Department of Transportation for access to SH360. Surveying services included performing boundary and topographic surveys; preparing preliminary and final plats; providing construction staking; and preparing easement documents.

                                                                                        Construction Cost: $200,000

Macatee Engineering performed the platting and design for this 3.8-acre site which includes a Sherwin Williams Paint Store, 85,000 square feet of retail space, and a 55,000 square foot lot open for development. Design included paving, dimension control, traffic, grading, erosion control, drainage, storm, water and wastewater improvements. Surveying services included performing boundary and topographic surveys; preparing preliminary and final plats; providing construction staking; and preparing easement documents.

                                                                         Construction Cost: $250,000 

Macatee Engineering performed platting and design for a Sonic drive-in in Indian Creek Ranch. Design included water, sanitary sewer, paving, grading and drainage improvements. Surveying services included performing boundary and topographic surveys; preparing preliminary and final plats; providing construction staking; and preparing easement documents.

Total Fee: $10,000

Macatee Engineering performed platting and design for multiple Walgreens stores in Dallas and Cedar Hill. Design included water, sanitary sewer, paving, grading and drainage improvements.

Total Fee: $40,000